Sage 200
Sage Intacct
Migrations · Updated November 19, 2026

How to migrate from Sage 200 to Sage Intacct

To migrate a client from Sage 200 to Sage Intacct with superglue's AI agent, connect the client's Sage 200 company, and give superglue access to the client's Sage Intacct account. superglue assesses the data in minutes, plans every phase, recommends an answer to each decision, and runs trial loads that reconcile to the cent before cutover. You review, decide and sign off with the client.

This guide covers Sage 200 Standard and Sage 200 Professional, the UK and Ireland editions.

What are the steps to migrate from Sage 200 to Sage Intacct?

Migrating from Sage 200 to Sage Intacct takes six steps: connect both systems, assess the data, plan every phase, decide the mapping, run trial loads and cut over. Each load repeats exactly what you tested, and every write waits for your approval.

  1. 01

    Connect Sage 200 and Sage Intacct

    Connect the client's Sage 200 company read-only through the Sage 200 API, or through the company database on SQL Server when the client or its partner runs Sage 200 Professional. superglue writes nothing. The client then gives superglue access to Sage Intacct.

  2. 02

    Assess the Sage 200 data

    In minutes, superglue counts every record, finds the open items and lists the data issues with examples. You know the size of the migration before you quote it.

  3. 03

    Plan every phase

    superglue drafts the plan from discovery to cutover, with tasks, owners and the Sage 200 specifics already in it.

  4. 04

    Decide the mapping

    superglue brings each decision below with a recommendation from the client's own data. You confirm or change each answer, and the client signs the mapping.

  5. 05

    Run the trial loads

    superglue loads a Sage Intacct sandbox or implementation company and compares it with Sage 200: the trial balance per period, the open receivables and payables per customer and vendor, the uncleared bank items, and the inventory value. superglue explains every difference, and you repeat the trial load until a full run reconciles with no new differences. The last run is a timed rehearsal of the cutover.

  6. 06

    Cut over

    At cutover, the client stops entry in Sage 200, and superglue loads the open items with the same steps as the trial loads. After the client closes the last period in Sage 200, superglue loads the final balances, and you sign the reconciliation with the client.

How do you get the data out of Sage 200?

  • For Sage 200 Standard, which Sage hosts, a Sage 200 user signs in once and superglue reads through the Sage 200 API. For Sage 200 Professional, the client or the partner turns the API on, or the client's IT creates a read-only SQL Server login and the superglue gateway reaches the server on the client's network.
  • Each Sage 200 company is its own database, so ask for every company in scope.
  • The client keeps working in Sage 200 until cutover.

On-premise clients install the superglue gateway once: Connecting to on-prem systems

What needs to be configured in Sage Intacct?

The client authorizes the superglue sender ID in Sage Intacct and adds a user for superglue. superglue configures Sage Intacct and loads the data through that access, in a Sage Intacct sandbox or implementation company first, in this order:

  1. 01

    Multi-entity, the base currencies and the first fiscal month. Base currencies and the first fiscal month can change only before transactions exist.

  2. 02

    The configuration of each module, such as General Ledger, Accounts Payable and Accounts Receivable, and the names of terms and dimensions.

  3. 03

    Entities, locations, departments and the other dimensions.

  4. 04

    The chart of accounts and the journals.

  5. 05

    Customers, vendors and items, then the opening balances and the open items.

Access setup for the client: Sage Intacct configuration guide

What moves from Sage 200 to Sage Intacct?

In Sage 200In Sage Intacct
Nominal codesGL accounts
Cost centres and departmentsDimensions such as departments, locations and classes
CustomersCustomers
Projects in Sage 200 ProfessionalProjects
SuppliersVendors
Stock itemsItems
Bank accountsChecking and credit card accounts

Open items

Open sales and purchase ledger transactions, open sales and purchase orders, and stock per warehouse with its cost.

Open items load as AR invoices and AP bills with their original numbers, dates and due dates, so the aging in Sage Intacct matches on day one.

History

Sage 200 keeps posted nominal transactions per period. superglue reads every year the client wants to keep.

History loads as summary journal entries per month, account and dimension.

Which decisions do you make when you migrate from Sage 200 to Sage Intacct?

  1. 01

    Where do Sage 200 cost centres and departments go?

    Sage 200 can make a cost centre and a department part of each nominal account. Sage Intacct keeps the GL account and moves them into dimensions.

    superglue maps cost centres and departments to Sage Intacct dimensions, and merges the repeated nominal codes into one GL account each.

  2. 02

    How does VAT move?

    Sage Intacct's UK VAT tax solution comes with the UK rates set up as tax details, and tax schedules pick the detail for each line.

    superglue maps each Sage 200 VAT rate in use to a UK tax detail, and checks the VAT on the open items before they load. For a company in Ireland, check the Ireland VAT tax solution first, because Sage Intacct lists it as Early Adopter.

  3. 03

    Which companies become entities, and which become locations?

    In Sage Intacct, an entity has its own books, tax and bank accounts. A location only adds a reporting value.

    superglue recommends one entity for each legal company in Sage 200, and locations for the sites inside a company.

  4. 04

    Which records are shared across entities?

    Customers, vendors and items can live at the top level and be shared, or belong to one entity.

    superglue recommends shared customers and vendors, so each company appears once and intercompany reporting stays clean.

  5. 05

    Which cutover date does the client use?

    A cutover on the first day of a period lets the open items and balances load as of one date. A fiscal year start keeps the year's reports and year-end filings in one system, and a date in the middle of the year means combining two systems for the audit and the tax returns. Avoid a date when the team must close the books or report results.

    superglue recommends the first day of a month, and the first day of the fiscal year when the client can wait for it. The final balances load after the last period in Sage 200 is closed.

  6. 06

    How much history moves?

    Most clients need the open items plus one to three years of monthly balances in Sage Intacct, at least the current and the prior fiscal year for comparison, and older years as yearly balances. The client keeps the older detail in an archive.

    superglue recommends two years of monthly balances per account, and full transaction detail only where the client needs to look into single transactions.

What are the common challenges when you migrate from Sage 200 to Sage Intacct?

Expect the chart of accounts to shrink

A Sage 200 nominal account is the nominal code plus an optional cost centre and department, and these cannot change after the account is saved, so one code often repeats many times. Show the client the new chart early, because their reports change with it.

VAT codes need a new home

Sage 200 keeps a VAT rate code on each transaction line, and the new system sets tax its own way. superglue lists the VAT codes in use with their rates and proposes the tax setup in the new system.

Unallocated payments distort the aging

Receipts and payments that were never allocated to an invoice leave both open in the ledger. Ask the client to allocate them before cutover. superglue lists them per customer and supplier.

Multi-company clients need an intercompany plan

Clients with several companies keep one database for each, with intercompany balances between them. Agree early which companies merge, which become entities, and how the intercompany balances settle. superglue reads every company and matches the intercompany balances.

Plan module configuration as its own workstream

In Sage Intacct, the settings of General Ledger, Accounts Payable and the other modules cannot be imported like data. Unless the partner starts from a template company, they are set by hand, screen by screen. superglue sets them and checks every value, so the configuration is ready when the data is.

Agree user-defined dimensions with the person who reports on them

A user-defined dimension stays in Sage Intacct once it holds data. Add only the ones the client will report on, and get each one agreed before the first load.

Open items must not count twice

Open invoices and bills post to the receivables and payables accounts when they load, and the opening trial balance holds the same amounts. Load the open items and the opening balances against one conversion account, and check that it ends at zero.

Plan fixed assets as their own stream

The trial balance brings the cost and the accumulated depreciation, but the asset register needs each asset with its in-service date, useful life and depreciation to date, and tax books need their own values. Agree early where the register lives after go-live, and reconcile it to the asset accounts.

superglue also runs the rest of the Sage Intacct project. See the Sage Intacct implementation

Frequently asked questions

Which data moves from Sage 200 to Sage Intacct?

The chart of accounts, customers, vendors and items, the open items, and as much history as the client needs. The mapping table on this page shows where each record lands in Sage Intacct.

Does superglue write to Sage Intacct without my approval?

No. superglue only reads Sage 200. Before any write to Sage Intacct, it shows the target, the connection and a transformed sample, and waits for your approval.

How do I know the migration is complete?

superglue reconciles the trial load and the final load against Sage 200: the trial balance per period, the open receivables and payables per customer and vendor, the uncleared bank items, and the inventory value. You get a reconciliation report to sign with the client.

What happens when I start this migration?

You sign up and connect the client's systems. If you want to see a full migration run first, superglue can set up Northwind Outdoor Supply, a sample client.

Start your Sage 200 to Sage Intacct migration

Sign up and connect the client's systems, or let superglue set up Northwind Outdoor Supply, a sample client, to see a full migration run first.

Migrations to Sage Intacct