NetSuite
Sage Intacct
Migrations · Updated November 19, 2026

How to migrate from NetSuite to Sage Intacct

To migrate a client from NetSuite to Sage Intacct with superglue's AI agent, connect the client's NetSuite account, and give superglue access to the client's Sage Intacct account. superglue assesses the data in minutes, plans every phase, recommends an answer to each decision, and runs trial loads that reconcile to the cent before cutover. You review, decide and sign off with the client.

What are the steps to migrate from NetSuite to Sage Intacct?

Migrating from NetSuite to Sage Intacct takes six steps: connect both systems, assess the data, plan every phase, decide the mapping, run trial loads and cut over. Each load repeats exactly what you tested, and every write waits for your approval.

  1. 01

    Connect NetSuite and Sage Intacct

    Connect the client's NetSuite account read-only through an integration record and SuiteQL. superglue writes nothing. The client then gives superglue access to Sage Intacct.

  2. 02

    Assess the NetSuite data

    In minutes, superglue counts every record, finds the open items and lists the data issues with examples. You know the size of the migration before you quote it.

  3. 03

    Plan every phase

    superglue drafts the plan from discovery to cutover, with tasks, owners and the NetSuite specifics already in it.

  4. 04

    Decide the mapping

    superglue brings each decision below with a recommendation from the client's own data. You confirm or change each answer, and the client signs the mapping.

  5. 05

    Run the trial loads

    superglue loads a Sage Intacct sandbox or implementation company and compares it with NetSuite: the trial balance per period, the open receivables and payables per customer and vendor, the uncleared bank items, and the inventory value. superglue explains every difference, and you repeat the trial load until a full run reconciles with no new differences. The last run is a timed rehearsal of the cutover.

  6. 06

    Cut over

    At cutover, the client stops entry in NetSuite, and superglue loads the open items with the same steps as the trial loads. After the client closes the last period in NetSuite, superglue loads the final balances, and you sign the reconciliation with the client.

How do you get the data out of NetSuite?

  • An administrator adds an integration record and a role for superglue, and superglue reads through SuiteQL.
  • Ask which subsidiaries are in scope, because a OneWorld account often holds several companies.
  • Each open request takes one of the account's concurrent request slots, which the client's other integrations share, so superglue plans the read around them.
  • One SuiteQL query returns at most 100,000 rows, so superglue reads a large transaction history in slices, such as one period at a time.

What needs to be configured in Sage Intacct?

The client authorizes the superglue sender ID in Sage Intacct and adds a user for superglue. superglue configures Sage Intacct and loads the data through that access, in a Sage Intacct sandbox or implementation company first, in this order:

  1. 01

    Multi-entity, the base currencies and the first fiscal month. Base currencies and the first fiscal month can change only before transactions exist.

  2. 02

    The configuration of each module, such as General Ledger, Accounts Payable and Accounts Receivable, and the names of terms and dimensions.

  3. 03

    Entities, locations, departments and the other dimensions.

  4. 04

    The chart of accounts and the journals.

  5. 05

    Customers, vendors and items, then the opening balances and the open items.

Access setup for the client: Sage Intacct configuration guide

What moves from NetSuite to Sage Intacct?

In NetSuiteIn Sage Intacct
AccountsGL accounts
Departments, classes, locations and custom segmentsDimensions such as departments, locations and classes
CustomersCustomers
ProjectsProjects
VendorsVendors
ItemsItems
Bank accountsChecking and credit card accounts

Open items

Open invoices, credit memos, vendor bills and vendor credits, open sales and purchase orders, and inventory per location with its cost.

Open items load as AR invoices and AP bills with their original numbers, dates and due dates, so the aging in Sage Intacct matches on day one.

History

NetSuite keeps every transaction with its lines and segments. superglue reads every year the client wants to keep.

History loads as summary journal entries per month, account and dimension.

Which decisions do you make when you migrate from NetSuite to Sage Intacct?

  1. 01

    Where do NetSuite departments, classes and locations go?

    Sage Intacct has standard dimensions for departments, locations and classes, plus user-defined dimensions. In a multi-entity company, entities are also locations.

    superglue maps subsidiaries to entities, NetSuite locations to locations below them or to warehouses, departments and classes to the matching dimensions, and custom segments to user-defined dimensions.

  2. 02

    What happens to NetSuite custom fields and records?

    Sage Intacct offers custom fields through Customization Services, and custom objects through Platform Services.

    superglue proposes custom fields for the values the client reports on, and leaves the rest in the archive.

  3. 03

    Which companies become entities, and which become locations?

    In Sage Intacct, an entity has its own books, tax and bank accounts. A location only adds a reporting value.

    superglue recommends one entity for each legal company in NetSuite, and locations for the sites inside a company.

  4. 04

    Which records are shared across entities?

    Customers, vendors and items can live at the top level and be shared, or belong to one entity.

    superglue recommends shared customers and vendors, so each company appears once and intercompany reporting stays clean.

  5. 05

    Which cutover date does the client use?

    A cutover on the first day of a period lets the open items and balances load as of one date. A fiscal year start keeps the year's reports and year-end filings in one system, and a date in the middle of the year means combining two systems for the audit and the tax returns. Avoid a date when the team must close the books or report results.

    superglue recommends the first day of a month, and the first day of the fiscal year when the client can wait for it. The final balances load after the last period in NetSuite is closed.

  6. 06

    How much history moves?

    Most clients need the open items plus one to three years of monthly balances in Sage Intacct, at least the current and the prior fiscal year for comparison, and older years as yearly balances. The client keeps the older detail in an archive.

    superglue recommends two years of monthly balances per account, and full transaction detail only where the client needs to look into single transactions.

What are the common challenges when you migrate from NetSuite to Sage Intacct?

Custom records and fields hold business data

Most NetSuite accounts have custom fields, custom records and custom segments that the business relies on. superglue lists every one that holds data, so the client decides which ones move.

Consolidated reports use their own exchange rates

OneWorld accounts translate subsidiaries with consolidated exchange rates. superglue reconciles each subsidiary in its own currency first, then the consolidated totals.

Pending approval transactions are not posted

Bills and journal entries pending approval are not in the general ledger yet, but they are often real. Ask the client to approve or delete them before each extract. superglue lists them.

Saved searches hold the client's reports

Clients run many reports as saved searches with their own filters and formulas. superglue lists the client's saved searches, so the client marks the reports to rebuild in the new system.

Plan module configuration as its own workstream

In Sage Intacct, the settings of General Ledger, Accounts Payable and the other modules cannot be imported like data. Unless the partner starts from a template company, they are set by hand, screen by screen. superglue sets them and checks every value, so the configuration is ready when the data is.

Agree user-defined dimensions with the person who reports on them

A user-defined dimension stays in Sage Intacct once it holds data. Add only the ones the client will report on, and get each one agreed before the first load.

Open items must not count twice

Open invoices and bills post to the receivables and payables accounts when they load, and the opening trial balance holds the same amounts. Load the open items and the opening balances against one conversion account, and check that it ends at zero.

Plan fixed assets as their own stream

The trial balance brings the cost and the accumulated depreciation, but the asset register needs each asset with its in-service date, useful life and depreciation to date, and tax books need their own values. Agree early where the register lives after go-live, and reconcile it to the asset accounts.

superglue also runs the rest of the Sage Intacct project. See the Sage Intacct implementation

Frequently asked questions

Which data moves from NetSuite to Sage Intacct?

The chart of accounts, customers, vendors and items, the open items, and as much history as the client needs. The mapping table on this page shows where each record lands in Sage Intacct.

Does superglue write to Sage Intacct without my approval?

No. superglue only reads NetSuite. Before any write to Sage Intacct, it shows the target, the connection and a transformed sample, and waits for your approval.

How do I know the migration is complete?

superglue reconciles the trial load and the final load against NetSuite: the trial balance per period, the open receivables and payables per customer and vendor, the uncleared bank items, and the inventory value. You get a reconciliation report to sign with the client.

What happens when I start this migration?

You sign up and connect the client's systems. If you want to see a full migration run first, superglue can set up Northwind Outdoor Supply, a sample client.

Start your NetSuite to Sage Intacct migration

Sign up and connect the client's systems, or let superglue set up Northwind Outdoor Supply, a sample client, to see a full migration run first.

Migrations to Sage Intacct